Firmware evolutions
Here are the new features added to Anytone ATD-868UV (firmware 2.31) and its CPS software (v1.31)
1. In CPS->Optional Setting->Power-on, add the Default Startup Channel and zone, it will allow you
choose a startup channel, every time when you power on the radio, you will be at the start up
channel.
2. Menu->Settings->Chan Set, add Select Contact, allow to choose a Contact and save the changes
to channel.
3. Allow create a new channel on radio or delete an existing channel . Operation as below:
- Create a new channel:
- Hold pressing MENU key, until the LCD display “Next Please Press Dial Key”,
- Press P1 key, the radio will enter into new channel setup.
- Delete an existing channel:
- Turn to the channel firstly,
- hold pressing MENU key, until the LCD display “Next Please Press Dial Key”,
- press P2 key, the radio will allow deleting the channel.
Download
Hardware V1.0 — Please use the firmware V1.31 for updating the radio.
Hardware V1.1 — Please use the firmware V2.31 for updating the radio.
- Download the Firmware 2.31 for Anytone ATD-868U 868UV_V2.31 FW version officail released.
- Download the Firmware 1.31 for Anytone ATD-868U 868UV_V1.31 FW version officail released.
France repeater Codeplug
A codeplug is available with 121 french repeater. After open it with the CPS software, mind to modify your CSS7 ID
- Download the “France” Codeplug for ATD-868UV 1.31/2.31 AT-D868UV v2.31 -France-F5UII-12-08-2018.rdt