Discover Anytone AT-D868UV, what is it really worth? 📶


You used to find on my blog articles about MMDVM. I’m back from HamRadio show in Friedrichshafen with this new DMR and analog dual band UHF and VHF in my luggage: the famous Anytone AT-D868-UVE. This new item is sell about150 € in Europe.

I take advantage of the few weeks of tests to present you an report of the use of this recent DMR Tier 2 talky-walky, and see with you if “famous” rhymes with “fabulous”. Let’s first look at the features on the paper.

The box contains :

  • Complete 37-page manual booklet in English (on paper!)
  • Anytone AT-D868UVE
  • Battery 3100 mAh
  • Portable dual band V/U antenna (157mm)
    Programming cable
  • Charging base
  • Charging Power Transformer
  • Belt clip
  • Lanyard

The box does not contain any software. You will need to download the programming software with its USB driver to install first (and firmware 2.30): 868UV_V2.30 official released


This article is “multipage”, to browse from one page to another or directly from the summary to the desired page

8 thoughts on “Discover Anytone AT-D868UV, what is it really worth? 📶

  1. aprs with anytone AT-D868UV?

    I’m also interesting in your MMDVM with STM32, how to start?
    Is the code opensource? I would adapt to STM32F072 nucleo, if possible?

    aprs avec un AT-D868UV ?

    Je suis aussi intéressé par votre MMDVM avec STM32, comment commencer ?
    Le code est-il open source ? Je m’adapterais au nuclĂ©o STM32F072, si possible ?

    1. Erik,

      As written in the review, APRS feature is not for moment supported since the format is not (for moment) supported by the networks. I need to test that in more detail.
      About MMDVM, yes the projects (MMDVM and MMDVMHost) are opensource : My PCB (with standard size components) is available on, as gerber PCB files here. MMDVM is not design for this nucleo STM32F072 board.


      Comme Ă©crit dans l’article, la fonction APRS n’est pas supportĂ©e pour le moment puisque le format n’est pas (pour le moment) supportĂ© par les rĂ©seaux. Je dois tester cela plus en dĂ©tail.
      A propos de MMDVM, oui les projets (MMDVM et MMDVMHost) sont open source : Mon PCB (avec composants Ă  taille standard) est disponible sur, ou avec les fichiers Gerber ici. MMDVM n’est pas conçu pour cette carte nuclĂ©o STM32F072.

  2. Bonjour comment supprimer le call end ?

    Hello how to suppress the call end?

    1. Julien,

      Tous simplement dans les options du CPS : Optional Settings / Onglet Digital Fun / Call End Prompt Box = Off


      Simply in the CPS options: Optional Settings / Digital Fun / Call End Prompt Box = Off

        1. En effet, l’option a Ă©tĂ© dĂ©placĂ©e. Elle est Ă  prĂ©sent dans l’onglet Display du CPS: Optional Settings / Onglet Display / Call End Prompt Box = Off


          Indeed, the option has been moved. It is now in the CPS Display tab: Optional Settings / Display Tab / Call End Prompt Box = Off

  3. Merci je confirme cela va mieux sans le bruit lol.

    Savez vous comment avoir un bip avant de parler ??

    Thanks I confirm it goes better without the noise (lol).

    Do you know how to get a beep before you talk??

    1. Un bip peu retentir Ă  la fin de la transmission de votre correspondant, permettant ainsi de savoir quand reprendre le microphone. Dans le CPS, ouvrir le panneau Optional Setting / Onglet Alert tone / Digital Call ResetTone = On

      A beep may sound at the end of your partner’s transmission, allowing you to know when to pick up the microphone. In the CPS, open the Optional Setting / Alert tone tab / Digital Call ResetTone = On tab.

Leave a Reply

Your email address will not be published. Required fields are marked *