New firmware 2.31 for Anytone ATD-868U

Firmware evolutions

Here are the new features added to Anytone ATD-868UV (firmware 2.31) and its CPS software (v1.31)

1. In CPS->Optional Setting->Power-on, add the Default Startup Channel and zone, it will allow you
choose a startup channel, every time when you power on the radio, you will be at the start up
channel.

2. Menu->Settings->Chan Set, add Select Contact, allow to choose a Contact and save the changes
to channel.
3. Allow create a new channel on radio or delete an existing channel . Operation as below:

  • Create a new channel:
    • Hold pressing MENU key, until the LCD display “Next Please Press Dial Key”,
    • Press P1 key, the radio will enter into new channel setup.
  • Delete an existing channel:
    • Turn to the channel firstly,
    • hold pressing MENU key, until the LCD display “Next Please Press Dial Key”,
    • press P2 key, the radio will allow deleting the channel.

Download

Hardware V1.0 — Please use the firmware V1.31 for updating the radio.
Hardware V1.1 — Please use the firmware V2.31 for updating the radio.

France repeater Codeplug

A codeplug is available with 121 french repeater. After open it with the CPS software, mind to modify your CSS7 ID

7 thoughts on “New firmware 2.31 for Anytone ATD-868U

  1. Bonjour Christian,
    Pour démarrer, je suis à la recherche d’un codeplug type (français) pour mon Anytone tout neuf.
    J’ai beaucoup “galéré” avec un GD 77 et j’ai un peu de mal avec le Anytone ….
    Vous avez ça dans un tiroir ?
    Merci d’avance et à très bientôt.
    Amitiés
    Jean
    F5DTB

    (Translation)
    Hello Christian,
    To get started, I’m looking for a (French) codeplug type for my brand new Anytone.
    I’ve had a lot of stress with a GD 77 and I’m having a little trouble with the Anytone…
    You got that in a drawer?
    Thank you in advance and see you soon.
    Friendships
    Jean
    F5DTB

    1. Bonjour Jean,

      Je viens de mettre à disposition en fin de cet article un codeplug des relais Francais avec les Talkgroups F et globaux. Une seule zone a été crée avec 121 relais (DMR et quelques analogiques). Voilà une base qui pourrait vous permettre d’ajouter des canaux (TG sur l’un ou l’autre relais) dans une ou plusieurs nouvelles zones.

      Bon paramétrage !
      73 Christian

      (Translation)
      Hello Jean,

      I just uploaded at the end of this article a codeplug of the French repeaters with the F and global Talkgroups. Only one zone has been created with 121 repeaters (DMR and some analog ones). This is a base that could allow you to add channels (TG on either repeater) in one or more new zones.

      Good settings!
      73 Christian

  2. Bonsoir Christian,
    Ca y est, j’ai chargé le nouveau Firmware, ainsi que le nouveau cps (après l’avoir un peu cherché !) , puis votre codeplug ….. et bien sûr, tout fonctionne !!
    J’ai commencé à personnaliser le codeplug, avec quelques fréquences analogiques et numériques.
    Maintenant c’est de la pratique ….
    Donc : MERCI
    Merci pour vos réponses et votre aide.
    A très bientôt certainement.
    Amitiés
    Jean
    F5DTB

    (Translation)

    Good evening Christian,
    That’s it, I loaded the new Firmware, as well as the new cps (after a bit of searching!), then your codeplug ….. and of course, everything works!
    I started customizing the codeplug, with some analog and digital frequencies.
    Now it’s work experience….
    So: THANK YOU
    Thank you for your answers and your help.
    I’ll certainly see you soon.
    Regards
    Jean
    F5DTB

    1. Heureux d’avoir pu vous aider. Alors à bientôt en DMR !
      73 Christian

      (Translation)
      Glad I could help. So see you soon in DMR!
      73 Christian

  3. Advertisements
  4. Hello Christian,
    Maybe you have seen this or some else reading has. I’ve loaded FW 2.31 and SW 1.31 without issue. When I attempt to read the radio with 1.31, I get this error, “GetOptionFromCommData_Error:—250000.” Everything works with software V1.26. The new software and firmware has features that I’d really like to test.

    I would appreciate any input.

    Thanks and 73,
    Don
    N6LHZ

    (Traduction)
    Bonjour Christian,
    Peut-être que vous avez vu ceci ou que d’autres lectures l’ont vu. J’ai chargé FW 2.31 et SW 1.31 sans problème. Quand j’essaie de lire la radio avec 1.31, j’obtiens cette erreur, “GetOptionFromCommData_Error:-25000000”. Tout fonctionne avec le logiciel V1.26. Le nouveau logiciel et le micrologiciel ont des caractéristiques que j’aimerais vraiment tester.

    J’apprécierais toute contribution.

    Merci et 73,
    Don
    N6LHHZ

    1. Hello Don,

      I read here that other one have this issue.
      I don’t have meet myself this issue here.
      Have you try to open on 1.31 a RDT file that was before saved in 1.26 ? Than upload the codeplug to your Anytone 2.31 from 1.31 CPS. I think that is how I have operated.

      Keep me informed.

      73, Chris

      (Traduction)
      Bonjour Don,

      J’ai lu ici que d’autres ont ce problème.
      Je n’ai pas rencontré moi-même ce problème ici.
      Avez-vous essayé d’ouvrir sur 1.31 un fichier RDT qui était auparavant sauvegardé en 1.26 ? Ensuite, charger le codeplug sur votre Anytone 2.31 à partir de 1.31 CPS. Je pense que c’est comme ça que j’ai opéré.

      Tenez-moi au courant.

      73, Chris

      1. Hi Chris,

        I determined that the issue is not really an issue. If you save the radio file and then upgrade CPS to V1.31 you need to do a write to radio instead of trying to read it. I am always cautious of error messages so I was hesitant to try this. I went ahead and used their default file and it wrote to the radio just fine. I loaded my save file without an issue. I like the new features.

        Thanks for your response. Guess I was being to careful. It is not my radio so I did not want to turn it to a brick.

        73,
        Don
        N6LHZ

        (Traduction)

        Salut Chris,

        J’ai déterminé que la question n’est pas vraiment un problème. Si vous sauvegardez le fichier radio puis mettez à jour CPS vers V1.31, vous devez écrire sur la radio au lieu d’essayer de le lire. Je suis toujours prudent avec les messages d’erreur et j’ai donc hésité à essayer ceci. Je suis allé de l’avant et j’ai utilisé leur fichier par défaut et il a écrit à la radio très bien. J’ai chargé mon fichier de sauvegarde sans problème. J’aime les nouvelles fonctionnalités.

        Merci pour votre réponse. Je suppose que j’étais trop prudent. Ce n’est pas ma radio, alors je ne voulais pas la transformer en brique.
        73

Leave a Reply to Jean de Bermingham Cancel reply

Your email address will not be published. Required fields are marked *