Brancher le programmateur USB
Connect the programmer
Position 3 links in the right order as shown in the pictures below in the “AF” delimited area next to the ARM. Be careful not to push the 3 pines too far.
- Pin 2: SWCLK is the clock, and connect to the pin closest to 3V3 in the serigraphed rectangle “AF”.
- Pin 6: GND is the ground, and is connected to the central pin of the “AF” serigraphed area.
- Pin 4: SWDIO transmits the data, and connects to the opposite pin of the 3V3 of the “AF” serigraphed area.